Send SMS to Myanmar
from $0.0160/msg

Reach 62 million Myanmar mobile subscribers instantly: $0.0160 USD per SMS, no hidden fees or minimums. Direct interconnection with MPT (45% market), Ooredoo (30%), and Telenor Myanmar (25%). Median latency 85 ms, 97.5% delivery success. No KYC at signup—just add your crypto wallet, top up with Bitcoin, USDT (TRC-20 preferred), Ethereum, Litecoin, Monero, or Solana ($5 minimum), and start sending. Full MCPT compliance, Myanmar Consumer Protection Law (2014) support, and sender ID registration managed end-to-end.

Why Myanmar Script SMS Segments Cut Your Character Budget in Half

Myanmar's Burmese script is a Unicode writing system, not a Latin-based alphabet. When your SMS contains even a single Burmese character, the entire message is encoded in UCS-2 (Universal Character Set, 16-bit), which allows only 70 characters per segment—compared to 160 characters for GSM-7 (Latin text). This encoding switch has a direct financial impact: a 140-character Burmese message consumes two SMS segments instead of one, doubling your per-message cost without doubling the perceived message length.

For example, the Burmese phrase "သုံးဝါးအင်္ဂါ" (Tuesday) is just 5 characters but must be sent in UCS-2 encoding if included in any message. A 150-character promotion written in Burmese occupies two full SMS segments at smsroute's $0.0160 per segment, totaling $0.032 for a single logical message. Mixed-script messages (e.g., "Hello ကျေးဇူးပြု၍" = "Hello thank you") trigger UCS-2 for the entire payload, not just the non-Latin portion. Plan for 2–3× segment budgets when targeting Myanmar-language campaigns, and segment your SMS list by language (Burmese-only, English-only, mixed) to optimize costs and latency.

smsroute handles encoding detection automatically: you send the message, we detect the character set, and apply the correct segment calculation. No manual encoding headers, no special API flags. The dashboard shows your segment count and cost in real time before you send.

GSM-7 vs. UCS-2 Encoding and Operator Reach

GSM-7 encoding covers the basic Latin alphabet, numbers, and common punctuation: A–Z, a–z, 0–9, space, @, $, ¥, è, é, ù, ì, ò, Ç, Ø, ø, Å, å, Δ, Φ, Γ, Λ, Ω, Π, Ψ, Σ, Θ, ξ, €, and a few control characters. Each character takes 7 bits; thus, 160 characters fit in a single 140-byte SMS segment. UCS-2 encoding uses 16 bits per character and can represent all Unicode characters, including Burmese, Thai, Khmer, Devanagari, Mandarin, Arabic, Hebrew, Emoji, and accented Latin (é, ö, ñ, etc.). UCS-2 supports only 70 characters per segment because 70 × 16 bits = 1120 bits ≈ 140 bytes.

All three Myanmar operators (MPT, Ooredoo, Telenor Myanmar) support both GSM-7 and UCS-2 encoding natively. Carrier networks detect incoming SMS encoding and route accordingly. smsroute's direct interconnections ensure that GSM-7 messages (English-only promotions, OTP codes) arrive at maximum density (160 chars/segment), while UCS-2 messages (Burmese-language content, mixed scripts) are properly rendered and delivered with character accuracy. There is no encoding fallback or lossy transcoding; Burmese characters are preserved end-to-end.

For English-language SMS (e.g., "Hello, welcome to our service!"), GSM-7 encoding is used, and 160 characters fit in one segment. For Burmese-language SMS (e.g., "ကျေးဇူးပြု၍ ကျွန်ုပ်မှ ၏ နှုတ်ခြင်းဆက်သွယ်မှုကို သုံးမည်"), UCS-2 is mandatory, and 70 characters fit in one segment. Mixed messages default to UCS-2.

Pricing Comparison: smsroute vs. Competitors

Cost Analysis: Sending 10,000 SMS to Myanmar costs $160 with smsroute, $348 with Twilio, $297 with Vonage, $312 with MessageBird, $330 with Plivo, and $331 with Sinch. Your savings with smsroute are $188 per 10,000 SMS vs. Twilio, $137 vs. Vonage, and $170 vs. MessageBird. For a monthly campaign of 100,000 SMS, smsroute saves $1,880 vs. Twilio. Crypto-only payment (no credit card fees, no currency conversion markup) eliminates an additional 2–5% cost that traditional gateways pass to customers. No setup fees, no monthly minimums, no per-account charges.

Mobile Operators: Market Share and Interconnect

Myanmar Post and Telecommunications (MPT) — 45% market share (28 million subscribers). MPT is the state-owned incumbent operator with near-universal network coverage across urban, suburban, and rural areas. MPT's A2P SMS gateway operates on legacy and modern IP infrastructure. Direct interconnection is available to licensed international gateways; typical carrier-to-carrier routing takes 50–100 ms. MPT numbers are allocated from the 9 mobile prefix: +95 9XX XXXXX.

Ooredoo Myanmar — 30% market share (18.6 million subscribers). Ooredoo is a Qatari-based operator that launched in Myanmar in 2014 and operates a modern LTE and 4G/5G network. Ooredoo's A2P infrastructure is IP-based and interconnects directly with international gateways. Ooredoo offers faster carrier routing (40–80 ms average) due to modern network architecture. Ooredoo numbers use the 9 mobile prefix like MPT.

Telenor Myanmar — 25% market share (15.5 million subscribers). Telenor is a Norwegian operator with competitive pricing and good coverage in Yangon and Mandalay. Telenor's A2P SMS gateway is modern, with direct IP interconnection to international gateways. Telenor latency is comparable to Ooredoo (40–90 ms). Telenor also uses the 9 mobile prefix for mobile numbers.

All three operators support A2P SMS from smsroute at full interconnection capacity. Your SMS list should include numbers across all three networks for maximum reach. smsroute's routing logic automatically selects the correct carrier based on the phone number prefix and subscriber database. Delivery success rates across all three operators are above 97%.

How to Send SMS to Myanmar in 3 Steps

Step 1: Create Your smsroute Account. Go to smsroute.cc and sign up with your email and a secure password. Confirm your email address and enable two-factor authentication (optional but recommended). No phone verification, no ID, no corporate documents required. In your account settings, add your crypto wallet address. smsroute accepts Bitcoin, USDT (TRC-20 preferred for speed and low fees), Ethereum, Litecoin, Monero, and Solana. Copy your wallet address and save it.

Step 2: Top Up Your Account with Cryptocurrency. Send a minimum of $5 USD in your preferred cryptocurrency to your smsroute wallet address. For USDT on Tron (TRC-20), typical blockchain confirmation takes 1–3 confirmations (~5–15 minutes total). Your account balance updates immediately after confirmation. Unlike credit card gateways, there is no fraud review, no payment processor decline, no bank delays. You control the transaction entirely.

Step 3: Send SMS to Myanmar Recipients. Use the smsroute Dashboard, REST API, or SMPP connection to send SMS. Format Myanmar mobile numbers in E.164 format: +95 9XX XXXXX (country code +95, mobile prefix 9, then 8-digit subscriber number). For example, +95 912345678 or +95 923456789. Include your registered sender ID (numeric 5–8 digits or alphanumeric, e.g., "MyBank" or "12345"). Send the SMS content. If the message contains Burmese script, it will automatically use UCS-2 encoding (70 chars/segment); plan accordingly. Monitor delivery status and DLR (Delivery Receipt) callbacks in your dashboard. Your balance decrements at $0.0160 USD per segment.

REST API Example (curl):

Python Example (requests library):

Both examples send SMS to a Myanmar mobile number (+95912345678) using your API key. The first uses English text (GSM-7 encoding); the second uses Burmese script (UCS-2 encoding, 2 segments). The API responds with a message ID and delivery status. Check your account dashboard for DLR callbacks confirming delivery to the recipient's phone.

curl -X POST https://api.smsroute.cc/v1/send \
  -H "Authorization: Bearer YOUR_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{
    "to": "+95912345678",
    "message": "Hello! Welcome to our service.",
    "sender_id": "MyBrand"
  }'

import requests
import json

api_key = "YOUR_API_KEY"
url = "https://api.smsroute.cc/v1/send"

headers = {
    "Authorization": f"Bearer {api_key}",
    "Content-Type": "application/json"
}

data = {
    "to": "+95912345678",
    "message": "သုံးဝါးအင်္ဂါ ကျေးဇူးပြုပြီး စာရင်းသွင်းလိုက်ပါ။",
    "sender_id": "MyBrand"
}

response = requests.post(url, headers=headers, json=data)
print(response.json())

import fetch from "node-fetch";

const apiKey = process.env.SMSROUTE_API_KEY;

const res = await fetch("https://api.smsroute.cc/v1/sms/send", {
  method: "POST",
  headers: {
    Authorization: `Bearer ${apiKey}`,
    "Content-Type": "application/json",
  },
  body: JSON.stringify({
    to: "+955551234567",
    from: "smsroute",
    text: "Your verification code is 384921",
  }),
});

console.log(await res.json());

<?php
$apiKey = getenv('SMSROUTE_API_KEY');

$payload = json_encode([
    'to'   => '+955551234567',
    'from' => 'smsroute',
    'text' => 'Your verification code is 384921',
], JSON_UNESCAPED_UNICODE);

$ch = curl_init('https://api.smsroute.cc/v1/sms/send');
curl_setopt_array($ch, [
    CURLOPT_POST => true,
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer ' . $apiKey,
        'Content-Type: application/json',
    ],
    CURLOPT_POSTFIELDS => $payload,
]);

echo curl_exec($ch);
curl_close($ch);

package main

import (
    "bytes"
    "encoding/json"
    "fmt"
    "io"
    "net/http"
    "os"
)

func main() {
    payload, _ := json.Marshal(map[string]string{
        "to":   "+955551234567",
        "from": "smsroute",
        "text": "Your verification code is 384921",
    })

    req, _ := http.NewRequest("POST",
        "https://api.smsroute.cc/v1/sms/send",
        bytes.NewBuffer(payload))
    req.Header.Set("Authorization", "Bearer "+os.Getenv("SMSROUTE_API_KEY"))
    req.Header.Set("Content-Type", "application/json")

    resp, err := http.DefaultClient.Do(req)
    if err != nil { panic(err) }
    defer resp.Body.Close()

    body, _ := io.ReadAll(resp.Body)
    fmt.Println(string(body))
}